Bradbond Walling Adhesive is a flexible cladding adhesive for external & internal floor & wall applications. It is specially formulated to make it easy to work with when fixing brick slips & natural stone to a range of substrates including sand / cement render, brick or block work. It can also be used with external wall installation systems. Simply mix 4.42 litres of clean water with each 17.00kg tub & apply 1.00m 2 at a time to a thickness of 3-20mm before leaving for 16 hours to set. Typical coverage per tub is 4.25m 2 at a depth of 3mm. ...

Bradpoint jointing compound is specially developed to ensure that your patio is jointed to perfection. It is suitable for use with all of Bradstone’s paving products, including porcelain, it is frost resistant & when cured provides a flexible yet durable finish. & it’s so easy to use. You can apply Bradpoint in any weather. You simply brush into the joints. One 20.00kg tub can cover up to 8.50m 2* * Coverage typically 8.50m 2. Example: a 15.30m 2 patio pack with 10-15mm joints that are 20-24mm deep will require two tubs. Each tub contains two foil bags with a coverage of 4.25m 2 per bag. *** If using with porcelain paving we strongly recommend the finished laid area be thoroughly cleaned using a porcelain cleaner. This helps remove general building dirt & any compound residue that may be present.*** ...

Bradpoint jointing compound is specially developed to ensure that your patio is jointed to perfection. It is suitable for use with all of Bradstone’s paving products, including porcelain, it is frost resistant & when cured provides a flexible yet durable finish. & it’s so easy to use. You can apply Bradpoint in any weather. You simply brush into the joints. One 25kg tub can cover up to 20m 2* * Coverage up to 20m 2 when using on 20mm thick paving with 5mm joints. Coverage up to 10m 2 when using on 20mm thick paving with 10mm joints. ...

Bradpoint jointing compound is specially developed to ensure that your patio is jointed to perfection. It is suitable for use with all of Bradstone’s paving products, including porcelain, it is frost resistant & when cured provides a flexible yet durable finish. & it’s so easy to use. You can apply Bradpoint in any weather. You simply brush into the joints. One 20.00kg tub can cover up to 8.50m 2* * Coverage typically 8.50m 2. Example: a 15.30m 2 patio pack with 10-15mm joints that are 20-24mm deep will require two tubs. Each tub contains two foil bags with a coverage of 4.25m 2 per bag. *** If using with porcelain paving we strongly recommend the finished laid area be thoroughly cleaned using a porcelain cleaner. This helps remove general building dirt & any compound residue that may be present.*** ...

Bradpoint jointing compound is specially developed to ensure that your patio is jointed to perfection. It is suitable for use with all of Bradstone’s paving products, including porcelain, it is frost resistant & when cured provides a flexible yet durable finish. & it’s so easy to use. You can apply Bradpoint in any weather. You simply brush into the joints. One 25kg tub can cover up to 20m 2* * Coverage up to 20m 2 when using on 20mm thick paving with 5mm joints. Coverage up to 10m 2 when using on 20mm thick paving with 10mm joints. ...

Bradpoint jointing compound is specially developed to ensure that your patio is jointed to perfection. It is suitable for use with all of Bradstone’s paving products, including porcelain, it is frost resistant & when cured provides a flexible yet durable finish. & it’s so easy to use. You can apply Bradpoint in any weather. You simply brush into the joints. One 25kg tub can cover up to 20m 2* * Coverage up to 20m 2 when using on 20mm thick paving with 5mm joints. Coverage up to 10m 2 when using on 20mm thick paving with 10mm joints. ...

The laying course uses Bradstone Bedding Aggregate, a 6mm angular, open graded material. Unlike normal bedding s&, it is free draining & therefore it does not require any control on moisture content. The laying course should be 50mm thick, rather than 30mm for conventional paving & it is not compacted before the blocks are laid. Once laid, & prior to jointing, a light pass over with a whacker plate with a rubber mat is required. The preparation & levelling of the bedding surface is critical as an aggregate bedding layer will not be compacted as with conventional block paving. Laid to a depth of 50mm 1 bulk bag covers 13m 2. ...

When laying Bradstone Infilta concrete block permeable paving, conventional MOT Type 1 is not used in the sub-base as it is not free draining, the Bradstone 20mm open graded drainage is used. In free draining applications, a suitable geotextile should be placed at formation level (overlapping joints by 300mm), below the Drainage Aggregate sub-base. When the sub-base is designed to hold water an impermeable memebrane lining should be used. The depth of the sub-base will be governed by the strength & type of the underlying ground, but typically you will need to be around 200mm deep on soils of good strength & 500mm in areas of poor soil strength. It is best to prevent vehicles running on the sub-base during construction if possible, as they will cause rutting in the loose surface. The blocks are restrained in the conventional way with a kerb or edging & provide more than adequate support to traffic. Laid to a depth of 200mm, 1 Bulk Bag covers 2.85m 2 Laid to a depth of 500mm, 1 Bulk Bag covers 1.1m 2 ...

Bradstone Infilta blocks have a nominal joint width of 5mm which is greater than a normal block paving. The Bradstone 3mm Jointing Aggregate should be used for joint filling. Brush in & after ensuring there is not loose aggregate on the surface that could mark the blocks, another pass with the whacker is required. Finally, brush in more aggregate to fill voids as required. 1 x 25kg bag covers 3.50m 2 ...

Bradstone Infilta blocks have a nominal joint width of 5mm which is greater than a normal block paving. The Bradstone 3mm Jointing Aggregate should be used for joint filling. Brush in & after ensuring there is not loose aggregate on the surface that could mark the blocks, another pass with the whacker is required. Finally, brush in more aggregate to fill voids as required. 1 x 25kg bag covers 3.50m 2 Assistance upon delivery may be a requirement for this product. Please call the office on 0800 032 6306 if you require any further information. ...