United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
More From Contributor
Original Airbot OMNIBUS F4 V6 Flight Controller Furling32 35A 3-6S
Blheli_32 Brushless With PDB For RC Drone FPV Racing
Original Airbot OMNIBUS F4 V6 Flight Controller Furling32 35A 3-6S Blheli_32 Brushless with PDB for RC Drone FPV RacingSpecification:Brand name:AirbotItem name:OMNIBUS F4 V6 Flight ControllerFurling32 35A ESCPDB BoardFlight ControllerUser Manual, DownloadOMNIBUS F4s upgrade version, using F405 and new target, with5x UARTsnow.classic OMNIBUS design, using F4 MCU controls OSD over SPI bus, compare the first version, we added BMP280 as barometer and SD Card supports.OSD Configuration has been incl. in Betaflight GUI.FCincl. 5V1A BEC on board(3-6s) and 1x 8V BEC for CameraMPU6000 at SPI bus, Ext, SPI for damped gyroUse fir eworks v2 firmware, inCLI, setgyro_to_use=SECONDNew version with 8PIN Sh1.0 Socket, could be much easier connect to our 4in1 ESC by one cable.On v5, we added
jumpers for Current source select, pleaseread the manual and set the jumperbefore using the FC.Feature:STM32 F405 MCU, Runs Betaflight 3.0 firmwareSBUS/PPM input (Pinheaders)6PWM output (1-4Pinheaders and Sh1.0 Plug, 5-6 as Pinheaders)Only 36x36mm, mount holes 30.5x30.5mmINCL. BARO BMP280SPI Sensor MPU6000FlashFurling32 - 32bit BLHELI ESCBLHeli_32 is the third generation BLHeli code, following base BLHeli and BLHeli_S.BLHeli_32 runs on an ARM 32bit MCU, initially it will be on a Cortex-M0 running at 48MHz, but there are MCUs out there that can run a lot faster.So what can the increased MCU speed do?First of all, it can run input signals with lower latency at faster rates.Dshot up to at least Dshot1200,
jumpers for Current source select, pleaseread the manual and set the jumperbefore using the FC.Feature:STM32 F405 MCU, Runs Betaflight 3.0 firmwareSBUS/PPM input (Pinheaders)6PWM output (1-4Pinheaders and Sh1.0 Plug, 5-6 as Pinheaders)Only 36x36mm, mount holes 30.5x30.5mmINCL. BARO BMP280SPI Sensor MPU6000FlashFurling32 - 32bit BLHELI ESCBLHeli_32 is the third generation BLHeli code, following base BLHeli and BLHeli_S.BLHeli_32 runs on an ARM 32bit MCU, initially it will be on a Cortex-M0 running at 48MHz, but there are MCUs out there that can run a lot faster.So what can the increased MCU speed do?First of all, it can run input signals with lower latency at faster rates.Dshot up to at least Dshot1200,
Product Description
Reviews/Comments
Add New
Vouchers
No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Denmark